Huawei Router Login 2026: Default IP, Username & Password

Huawei Router Login 2026 Default IP, Username & Password

Huawei Router Login. Getting into your Huawei router settings is easier than most people think. Whether you’re troubleshooting a connection issue or changing your WiFi password, everything runs through a simple browser-based login page that takes less than a minute to reach.

The tricky part is usually knowing the right IP address and credentials for your specific model and that’s exactly what this guide covers, start to finish.

Finding the Right Gateway to Your Huawei Router Admin Interface

Most people don’t realize their local IP address is printed right on the router’s nameplate no guesswork needed. For most Huawei setups, typing one of these into your browser gets you straight to the web-based management page:

  • 192.168.1.1: most common for fixed broadband models
  • 192.168.8.1: standard for HUAWEI Mobile WiFi
  • 192.168.100.1: used on some carrier custom versions
  • 192.168.0.1: less common but still found on older models

If one address doesn’t load the login page, try the next. Carrier custom versions sometimes use a different default IP than what’s listed in the manual, so the nameplate is always your most reliable reference.

A few things worth knowing before you log in:

  • Use a wired Ethernet cable connected to the LAN port during setup Wi-Fi drops mid-save cause unnecessary headaches
  • If you’re on a phone browser, switch to PC-based UI using the icon in the upper right corner before touching any settings
  • If your setup has a secondary router cascaded behind an uplink HUAWEI router, watch for IP conflicts around 192.168.3.1 and 192.168.4.1 the secondary router will auto-shift its LAN IP to avoid collision

Default IP Address for Huawei Routers

Not every Huawei router shares the same default IP. Here’s a full reference:

IP AddressNotes
192.168.8.1Standard for HUAWEI Mobile WiFi
192.168.1.1Most common for fixed broadband models
192.168.100.1Some carrier and broadband models
192.168.l00.1Alternate notation for 192.168.100.1
192.168.0.1Older or region-specific models
192.168.0.100Less common variant
192.168.1.250Found on select Huawei models

If the admin panel isn’t loading, the issue is almost always a wrong IP in the address bar not a browser problem. Check the nameplate on the bottom of the device for the correct network address.

Default Username and Password for Huawei Routers

For most models, the default username and password is simply admin / admin. But it varies by model:

ModelUsernamePassword
HG520adminadmin
HG530adminadmin
HG531rootadmin
HG532adminadmin
HG8045telecom / adminadmin / telecom
HG8120adminadmin
HG8145Vrootadmin
HG8240telecom / adminadmin / telecom
HG8245rootadmin
HG8247Hrootadmin
B310adminadmin
B525adminadmin
E5180adminadmin

For URL-based access, credentials vary further:

URLUsernamePassword
192.168.10.1huaweiadmin1234
192.168.100.1login1234
192.168.100.1huaweiadmin12345678
192.168.100.1routeradmin
192.168.1.1huawei(blank)

Some older models accept a blank password, while others use admin123456 or 12345678. If none of these work, the credentials have been changed a hard reset is your cleanest fix. Always update your login credentials after first access; leaving the default username and password on any web interface is an open door.

Huawei Router Login Steps

Here’s the full login process, laid out simply:

  1. Connect your device plug an Ethernet cable into the LAN port of the router, or join the wireless network if a wired connection isn’t available
  2. Open your web browser and type the default IP address (usually 192.168.1.1 or 192.168.8.1) into the address bar, then press Enter
  3. The router login page loads you’ll see two text fields for your username and password
  4. Enter your credentials admin / admin for most models
  5. Click Log In or LOGIN you’ll land on the home page of the web interface, your full control panel for managing broadband, modem, and LAN settings

For cascaded router setups:

  • Connect the computer to the LAN port of the secondary router via Ethernet cable
  • Check your computer’s IP address
  • Use that IP segment to identify the router’s current address if the computer shows 192.168.4.x, the secondary router login IP is 192.168.4.1

Troubleshooting / Help

ProblemWhat to Check
Login page not loadingConfirm device is connected to Wi-Fi or LAN cable is in a LAN-labelled port
Page loading slowlyLikely an IP address mismatch try alternate IPs from the list
Wrong IP addressCheck the nameplate or try 192.168.0.1, 192.168.100.1, or 192.168.1.250
Forgot login passwordHard reset the router press and hold reset button for 10 seconds
WAN cable issueMake sure WAN cable is in the WAN port, not a LAN port

A few extra tips:

  • If the browser just spins, verify the router IP in your network settings matches what you’re typing
  • Speed issues and pages with problems loading usually trace back to an IP address mismatch
  • After a hard reset, the router returns to factory settings you’ll need to reconfigure everything from scratch using default credentials

Change WiFi Password on Huawei Router

Changing your WiFi key on a Huawei modem takes about 90 seconds once you’re inside the web interface:

  1. Open your browser and go to 192.168.100.1
  2. Log in with your credentials
  3. Navigate to the WiFi settings section
  4. Find the WPS Security or WPS password field
  5. Enter your new WiFi key and save changes

Every device on the network will need to reconnect using the new password after saving.

View Huawei WiFi Password from Cell Phone

Already connected to WiFi but forgot the password? You don’t need to change it just follow these steps on your Huawei mobile:

  1. Open the Settings menu
  2. Go to Wireless and Networking
  3. Check under the Advanced option the password may be directly visible
  4. If not, tap to generate a QR code for the connected network
  5. Use any online QR decrypt tool to extract the WiFi password from the code

You must already be connected to the Wi-Fi network to use this method it’s a view-only approach, not a bypass.

Popular Huawei Models

These models come up most often in home and carrier network setups:

  • Huawei EG8141A5
  • Huawei HG8145V5
  • Huawei HG8245H
  • Huawei HG9245W5

Each follows the same web interface login process, with IP address and firmware details specific to the model.

Huawei Routers Full Model List

The complete Huawei network device range covers consumer, enterprise, and carrier deployments. Every model uses the same admin panel and web interface login structure:

Device ModelDevice ModelDevice ModelDevice Model
AP6010DN-AGNAP6050DNAP6150DNAP6510DN-AGN-US
AP6610DN-AGN-USAP7030DN-ACAP7060DNAP7110DN-AGN
AP7130DN-ACHuawei Ascend G6Huawei Ascend M860B190
B200B222s-41B2268HB2268S PLDT
B3000 VodafoneB310 LTE CPEB310s-22B315s-22
B315s-936B525s-23aB525s-95aB593
B593s-22B660B681B683
B68AB68LB880-75B882-66
B890-66B932B933B970
BM625BM632BM635D100
D105DR814E153E226
E355E5172E5180E5186
E5220E5330E5331E5336
E5338E5372E5377sE5573
E5577sE5730E5770E5776
E5785E5786E583CE585
E586E5878E5885E8231
E960EG8245HEGW1500EEchoLife HG520b
HG521HG532HG552aHG556a
HG655bHG8247Hv2HG851HG8546M
BM626F2000HA35HG231f
HG232HG253sHG255sHG256s
HG510HG521cHG530HG531
HG533HG552eHG553HG622
HG630HG633HG635HG655
HG658HG659HG685cHG8010
HG8045HG8145V5HG8245HG8247
HG8346MHG8405HG850aHHG2500
K3765MT130UMT820MT880
MT882MT883PT530R205
SmartAX MT800SmartAX MT820SmartAX MT841SmartAX MT880
SmartAX MT882WA1003AWE3200WS319
WS322WS323WS325WS330
WS331CWS5200WS831WS860s
WS880eSpace EGW1500EeSpace EGW1520

FAQs About Huawei Router Login

The default username and password for HUAWEI Mobile WiFi routers is admin for both fields. Enter these on the login page of the web interface to access the management page and router settings. If admin/admin doesn’t work, the credentials have been changed check the nameplate or do a hard reset to restore authentication defaults.

For the large majority of HUAWEI Mobile WiFi routers, the default password is admin. This gives you access to the login page and full web interface. Carrier-customized models may use a different password printed on the nameplate always check there first before attempting a reset.

The default IP for most HUAWEI Mobile WiFi routers is 192.168.8.1. Type this into your browser’s address bar to reach the login page and admin panel. For fixed broadband Huawei models, 192.168.1.1 is more common. If neither loads the web interface, check the nameplate for the actual router IP.

Type the router’s IP address into your browser’s address bar and press Enter. Enter your username and password admin/admin in most cases then click OK or LOGIN. You’ll go straight into the admin panel and management page where all network configuration options are available.

Start with the basics:

  • Check the WAN cable is in the WAN port, not a LAN port
  • Confirm the computer or phone is connected via Wi-Fi or a LAN cable in a LAN-labelled port
  • Verify the IP address in the browser matches the router’s actual network address

Most troubleshooting on a Huawei router resolves at one of these three checkpoints.

Press and hold the reset button on the router body for 5 to 10 seconds. This restores factory settings and returns login credentials to their defaults. After the reset, access the management page using the standard default username and password to regain full web interface control.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *